Eesti
Русский
Wireless fire detector with temperature and carbon oxide sensors that monitors security in the room twenty four hours a day and immediately notifies of dangerous CO levels, smoke and sharp jumps in temperature.
- Authentication to prevent forgery
- Jamming detection and communication channels encryption
- Tampering alarm
- Device registers smoke, sharp jumps in temperature, and dangerous CO levels
- Can operate independently from Ajax Hub, notifying of danger by means of a built-in siren
- Independently tests the smoke chamber and gives prompt notification of the need to dust
Principle of operation
Detects human presence by temperature difference with background thermal radiation. The microwave sensor prevents false alarms caused by complex interference.
Features
Designed for operation in rooms with fireplaces and air conditioners. Detects and ignores draughts, movement of curtains and blinds, and light flickering, glare and reflections.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
| Classification |
Radio channel smoke detector with temperature sensor and built-in siren
|
| Type of detector |
Wireless
|
| Installation method |
Indoors
|
| Compatibility | |
| Sensing element |
Photoelectric, CO and temperature sensors
|
| Activation threshold |
+59°С ±2°С
|
| Type of notification |
Sound/light
|
| Volume of built-in siren |
85 dB
|
| Alarm signal delivery time |
0.15 s
|
| False alarm filter |
+
|
| Interconnected alarms |
+
|
| Power supply |
Battery: Two CR2 batteries, 3 V
Backup battery: CR2032 |
| Battery life |
Up to 4 years
|
| Jeweller radio technology |
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices Operating frequencies — 868.0-868.6 MHz Self-adjusting RF output power — up to 20 mW Block encryption based on AES algorithm Detector polling period — 12−300 s |
| Additional temperature sensor |
Available
|
| Operating temperature range |
From 0°С to +65°С
|
| Permissible humidity |
Up to 80%
|
| Anti-sabotage
|
Protection against fraud
Jamming detection Tamper-resistant
|
| Remote setting and testing |
+
|
| Dimensions |
132 × 132 × 31 mm
|
| Weight |
220 g
|
| Complete set
|
FireProtect Plus detector
SmartBracket mounting panel 2 x CR2 batteries (pre-installed) 1 x backup battery CR2032 (pre-installed) Installation set User’s guide |
