Eesti
English
Пожарный датчик с сенсором температуры круглосуточно следит за безопасностью в помещении и моментально сообщает о появлении дыма и резких скачках температуры.
- Аутентификация для предотвращения подделки
- Обнаружение помех и шифрование каналов связи
- Tampering alarm
- Фиксирует появления дыма и резкие скачки температуры в помещении
- Сигнализирует об опасности с помощью встроенной сирены
- Автоматически тестирует камеру дыма и сообщает о необходимости очистки
Principle of operation
The device detects smoke by means of a camera with photoelectric sensor. If no smoke is emitted, the additional detector registers temperature increase in the room.
Features
It can operate independently from the hub, emitting a fire alarm by means of a built-in siren. Several detectors indicate an alarm simultaneously.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
| Classification |
Radio channel smoke detector with temperature sensor and built-in siren
|
| Type of detector |
Wireless
|
| Installation method |
Indoors
|
| Compatibility | |
| Sensing element |
Photoelectric and temperature sensors
|
| Activation threshold |
+59°С ±2°С
|
| Type of notification |
Sound/light
|
| Volume of built-in siren |
85 dB
|
| Alarm signal delivery time |
0.15 s
|
| False alarm filter |
+
|
| Interconnected alarms |
+
|
| Power supply |
Battery: Two CR2 batteries, 3 V
Backup battery: CR2032 |
| Battery life |
Up to 4 years
|
| Jeweller radio technology |
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices Operating frequencies — 868.0-868.6 MHz Self-adjusting RF output power — up to 20 mW Block encryption based on AES algorithm Detector polling period — 12−300 s |
| Additional temperature sensor |
Available
|
| Operating temperature range |
From 0°С to +65°С
|
| Permissible humidity |
Up to 80%
|
| Anti-sabotage |
Protection against fraud
Jamming detection Tamper-resistant
|
| Remote setting and testing |
+
|
| Dimensions |
132 × 132 × 31 mm
|
| Weight |
220 g
|
| Complete set |
FireProtect detector
SmartBracket mounting panel 2 x CR2 batteries (pre-installed) 1 x backup battery CR2032 (pre-installed) Installation set User’s guide |
